|Material:|| Chrome on GLASS |
|Polarity:|| Positive Image |
APPLIED IMAGE, in conjunction with Hewlett Packard Corp., has developed a unique, and extremely accurate, PICK & PLACE target set designed to check for accuracy and repeatability of your robotic system, quick and easy.
The target set consists of a receiver grid (LAND PATTERN) and the parts to be picked (COMPONENTS). The component part is picked by the robotic system and placed onto the land pattern at which point Robotic/Vision position placement can be easily measured using the integrated scales which are built into the target land pattern design.
The APPLIED ACCU-Place Pick & Place Calibration System target addresses the important issues of the robotic “pick and place" testing in an inexpensive mode. The test set comes complete with full instructions.
The Land Pattern and all of the Test Components can be calibrated and certified to NIST traceable standards. In addition, APPLIED offers Anti-RefIective coatings (AR) on all components.
The patterns can also be customized for two sided systems or on reflective materials where reflection images are a necessity (instead of transmission).
The APKIT-1 ACCU-Place Land Pattern Kit consist of:
|APLP-1||ACCU-Place Land Pattern Plate|
|APTC-1||40mm x 0.5mm pitch Test Component|
|APTC-2||40mm x 0.4mm pitch Test Component|
|APTC-3||40mm x 0.3mm pitch Test Component|
|APTC-4||32mm x 0.5mm pitch Test Component|
|APTC-5||32mm x 0.4mm pitch Test Component|
|APTC-6||32mm x 0.3mm pitch Test Component|
|APTC-7||TAB 236 x 0.3mm pitch Test Component|